LogTag TREX-8

LogTag^® TREX-8 remote probe temperature Recorder

The LogTag^® Remote Probe Temperature Recorder measures and stores up to 8000 temperature readings over -40°C to +99°C (-40°F to +210°F) measurement range.

Using the LogTag^® Interface and the freely available companion software LogTag Analyzer, the LogTag^® is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicator.

Readings are downloaded using LogTag Analyzer which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as MS Excel.

Highlights
	Alert indicator – indicates if readings are outside of preset limits
	OK indicator indicates if still recording and if readings within configured limits
	Inspection mark in log by push button
	Push Button Logging start with optional delayed start or specific Time & Date start
	Rapid Download! Takes only seconds to download recordings
	‘Pre-Start’ logging - Logtag can be configured to record even if it has not been started.
	High performance at low cost
	Credit card sized case – thin enough to be easily mailed “letter rate”.
	Real time clock records time & temperature simultaneously
	Easy to use LogTag Analyzer software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to fomats compatible with other applications such as MS Excel
	Re-calibration to achieve higher accuracy possible
	High quality gold plated remote sensor connector
	Interchangeable Remote Probes – LogTag remote temperature probes are interchangeable provided they are changed with LogTag ST100 type remote temperature sensors.

Remote Probe Option (type ST100)
Part#s ST100S-15 (1.5m) or ST100S-30 (3m)		Short Tipped probe The short tipped probe incorporates a 22mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief. All materials at probe end of cable are FDA food rated including the cable. Supplied standard (part# ST100S-15) with 1.5m (4'11”) or extended (part#ST100S-30) with 3m (9'10") cable terminated to MCX plug for plugging into LogTag^® TREX.

Part#s ST100T-15 (1.5m) and ST100T-30 (3.0m)		Tipped probe The tipped probe incorporates a 140mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief. All materials at probe end of cable are FDA food rated including the cable. Supplied standard (part# ST100HT-15) with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug for plugging into LogTag^® TREX.

Part#s ST100H-15 (1.5m) and ST100H-30 (3.0m)		Handled probe The standard handled probe incorporates a 70mm long shaped overmolded handle with a 105mm length 5mm OD (slightly greater than 3/16”) 316 stainless probe. All materials at probe end of cable are FDA food rated including the cable. Supplied standard (part# ST100H-15) with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug for plugging intoLogTag^® TREX.

Parts# ST100B-15 (1.5m) and ST100B-30 (3.0m)		Bare probe Bare sensor without stainless sheath ready for fitting to custom probe assembly. Not rated for food contact or environmentally rated. Supplied standard (part# ST100B-15) with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug for plugging intoLogTag^® TREX.

Downloads

Product Datasheet		LogTag TREX-8 product datasheet
Quick Start Guide		Quick start guide

Specifications
Model#		TREX-8
Remote SensorMeasurement Range		-40°C ~ +99°C (-40°F ~ +210°F)
Recorder operating temperature range		-40°C ~ +85°C (-40°F ~ +185°F)
Resolution		< 0.1°C for -40°C ~ +40°C, < 0.2°C for +40°C ~+80°C
Accuracy		With recorder case sitting in environmental temperature between 0°C ~ 50°C the rated accuracy is :-±0.5°C for -10°C~ +40°C better than ±0.7°C for -10°C~ -30°C & +40°C~+60°C better than ±0.8°C for -30°C~ -40°C & +60°C~+80°C better than ±1.0°C for +80°C~+99°C
Sensor reaction time (T90)		T90 typically less than 2 minutes in moving air (1m/s) for ST100T,ST100H & ST100S types.
Capacity		8032 readings (16K bytes memory)
Sampling frequency		adjustable, 30 sec to several hours
Logging start options		Push button start or specific date & time.
Recording indication		Flashing 'OK' indicator flashing 'Alert' indicator.
Download Time		Typically with full memory (8000 readings) in less than 5 secs depending on computer or readout device used.
Environmental		IP61
Power source		3V Lithium battery
Battery life		2 ~ 3 years of normal use (based on 15 minute logging, download data monthly.
Size		86mm(H)x54.5mm(W)x8.6mm(T)
Weight		35g
Case Material		Polycarbonate
Standard remote sensor cable lengths		Standard: 1.5m (4’11”) Extended: 3 m (9’10”) (recommended maximum)
Remote Sensor Cable Type		PTFE (FDA food contact rated) coaxial
Other features		• Logging start by push button or specific date/time start • Optional clearing of alert indication by push button (places inspection make at same time). • Download inspection mark recorded in LogTag memory every time LogTag is downloaded. • 'Prestart' fail-safe logging (records temperature data even if not started) • Low Battery indication in software. • Comprehensive Alert indicator configuration. • Calibration to achieve higher accuracy possible.
Note: 1. Resolution & Accuracy are rated values - actual product performance may be substantially better than figures stated. 2. LogTag^® ST100 remote probes are designed and calibrated for interchangeability with TREX loggers to the standard rated accuracy of the product. If a TREX/ST100 probe combination is calibrated to a higher level of accuracy (as is possible) then care should be taken to always use the same TREX/ST100 combination for measurements as the ST100 sensor is not rated interchangeable at accuracies better than the TREX/ST100 rating in this specification.

Standards compliance
EMC Compliance		Tested and complies with EC EMC directives (EN 50081-1:1992 & EN 61000-6-1:2001) see LogTag CE mark EMC declaration of conformance Tested and complies FCC Part 15 Subparts A and B. see LogTag FCC EMC declaration of conformance
FDA CFR21 Part 11 Compliance		Designed for FDA CFR21 Part 11 Digital signatures
		Manufactured to meet the European RoHS Directive The RoHS Directive stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". This Directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.


Products Overview Standard Temperature Recorders TRIX-8 temperature recorder TRIX-16 temperature recorder TREX-8 remote probe temperature Recorder SRIC-4 temperature Recorder Temperature Recorders with display TRID30-7 Temperature Recorders with display TRID30-7FW Vaccine Refrigerator Temperature Recorder TRED30-7 Temperature Recorders with display and remote probe Low Temperature Recorders Dry Ice “Probe-less” Temperature Recorder (TRIL-8 & SRIL-8) TREL-8 Low Temperature remote probe temperature recorder Humidity & Temperature Recorder WHO PQS Prequalified PQS Products Summary PTID30-7F Temperature Recorder with 30day summary display PTED30-7F Temperature Recorder w- 30day summary display & remote probe TRID30-7FW Vaccine Refrigerator Temperature Recorder TRIX-8 temperature recorder TIC20 Shipping Indicator (PQS version) Temperature Indicators TIC20 shipping indicator TICT shipping indicator Interface Cradles Accessories	Software Summary Download User guide	Help FAQ Solving Problems ..	Enquire	About Us ..	News..	Applications ..	Home