Products


LogTag® TRIX-16 Temperature Recorder



LogTag TRIX-16 is the same size as your credit card and still thin enough to be mailed 'letter rate' in the post. This means not too small to be too hard to find and fits into most packaging easily,

This recorder is equipped with a unique external temperature sensor arrangement providing fast reaction time to temperature change.

The Alert indicator provides warning if the monitored temperature has moved out of set limits. Comprehensive options allow customisation of alert settings to suit a particular application thereby minimising chance of a false alert. This insures the status of the shipment is directly linked to the alert indication.

Using the LogTag Interface and LogTag’s freely available companion software LogTag Analyzer , the LogTag is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicator.

Readings are downloaded using LogTag Analyzer which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as Excel.

 
Highlights
Larger memory size for longer recording periods or smaller recording intervals
Alert indicator – indicates if readings are outside of preset limits
OK indicator indicates if still recording and if readings within configured limits
Inspection mark in log by push button
Push Button Logging start with optional delayed start or specific Time & Date start
Rapid Download! Takes only seconds to download recordings
‘Pre-Start’ logging - Logtag can be configured to record even if it has not been started.
High performance at low cost
Credit card sized case – thin enough to be easily mailed “letter rate”.
Real time clock records time & temperature simultaneously
Easy to use LogTag Analyzer software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to fomats compatible with other applications such as Excel
Re-calibration to achieve higher accuracy possible
   

Product Datasheets

 
Quick Start Guide
 

Specifications
Model#
 
TRIX-16
Measurement Range
 
-40°C ~ +85°C  (-40°F ~ +185°F)
Resolution
 
< 0.1°C for -40°C ~ +40°C,
< 0.2°C for +40°C ~+80°C
Accuracy
 
better than ±0.5°C for -20°C~ +40°C.
better than ±0.7°C for -20°C~ -30°C & +40°C~+60°C
better than ±0.8°C for -30°C~ -40°C & +60°C~+80°C
Sensor reaction time
 
typically less than 5 minutes(T90) in moving air (1m/s).
Capacity
 
16159 readings (32K bytes memory)
Sampling frequency
 
adjustable, 30 sec to several hours
Logging start options
 
Push button start or specific date & time. Optional start delay of up to 18hours.
Recording indication
 
Flashing 'OK' indicator / flashing 'Alert' indicator.
Download Time
 
Typically with full memory (16159 readings) in less than 10 seconds depending on computer or readout device used.
Environmental
 
IP65 (roughly equivalent to NEMA 4)
Power source
 
3V Lithium battery
Battery life
 
2 ~ 3 years of normal use (based on 15 minute logging, download data monthly.
Size
 
86mm(H)x54.5mm(W)x8.6mm(T)
Weight
 
35g
Case Material
 
Polycarbonate
Other features

 

• Logging start by push button or specific date/time start
• Optional clearing of alert indication by push button (places inspection make at same time).
• Download inspection mark recorded in LogTag memory every time LogTag is downloaded.
• 'Prestart' fail-safe logging (records temperature data even if not started)
• Low Battery indication in software.
• Comprehensive Alert indicator configuration.
• Calibration to achieve higher accuracy possible.

Note: Resolution & Accuracy are rated values - actual product performance may be substantially better than figures stated.

Standards compliance
EMC Compliance
 

Tested and complies with EC EMC directives (EN 50081-1:1992 & EN 61000-6-1:2001)
see LogTag TRIX-16 CE mark EMC declaration of conformance

Tested and complies FCC Part 15 Subparts A and B.
see LogTag TRIX-16 FCC EMC declaration of conformance

FDA CFR21 Part 11 Compliance
CFR21Part11

 
Designed for FDA CFR21 Part 11 Digital signatures
 
Manufactured to meet the European RoHS Directive
The RoHS Directive stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". This Directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.

 

Accessories

 


INTERFACE CRADLES

Logtag's unique interface cradle design provides rapid and reliable LogTag data transfer to Logtag Analyzer software in a matter of seconds. By far the fastest in it's class.
Interface cradles are available in USB and RS232 connection versions.

Click here for Interface Cradle information area

 
 


Wall Mount Bracket

The LogTag Wall Mount Bracket provides an easy and tidy solution to mounting a LogTag on a wall,door or vertical surface while still allowing easy removal of the LogTag for inspection or download.

Click here for Wall Mount Bracket details

 
 

 

Protective Enclosure

The LogTag® Protective Enclosure is specifically designed for use with LogTag recorder products and allows LogTags to be used in harsh environments.

Click here for Protective Enclosure details


 

 


Last updated February 21, 2013 , © Copyright LogTag Recorders Limited
<<OPENHOST SERVER>>